iSolution iMove 250W

Product Information

iSolution technology allows synchronisation of different types of intelligent iSolution fixtures via either a custom-built iLead DMX-512 controller or in stand-alone mode. iLead (Integrated Lighting System) allows fixtures to be linked and work in synchronisation, regardless of type, including iLead-equipped scanners, moving heads, and colour changers. The iLead controller can also remotely set the DMX addresses of the fixtures. All units are also controllable via any universal DMX-512 controller. Conversely, the iLead controller is a universal DMX-512 controller and can be used with non-iSolution fixtures

Features:

Setting and addressing : 4 x 7 segment blue LED display. LED display with on/off setting function.
Data in/out : Locking 3-pin XLR iSolution operation
Consistent DMX configuration enables iMove series to be linked with iRock, iShow and other iSolution effects
Remote DMX Addressing (RDA): DMX address can be set remotely by iLead controller
When the DMX signal is absent, the iMove will switch to Stand Alone mode automatically
Easy installation, easy addressing, and easy operation. Pre-programmed function 
Stand alone mode
Built in dynamic lighting shows for instant operation
User friendly easy controller (CA-8): has various lighting shows at your fingertips
Pan: 540 degrees / 270 degrees 
Automatic PAN/TILT Correction. CMY Mixing system 
Cyan: 0 - 100%, Magenta: 0 - 100%, Yellow: 0 - 100% Colour wheel 
6 trapezoid dichroic colours plus white 
Rainbow effect in both directions
Effect Wheel 
Frost filter and diagonal lens
Dimmer/ Shutter 0 - 100% dimmer. 
Independent shutter/ variable speed strobe  
High quality lens and dichroic colours
Auto focus

Specification:

Power supply: 240v
Lamp:  MSD250 / NSD 250
Replacement lamp: Lamp80
Dimensions 428 x 387 x 491mm
Weight 30.5kgs