AURA-2B1800 is two channels, 2x1800W RMS @4Ω, high efficiency amplifier (class D). Compatibility with both Low and Hi impedance configurations and supporting dual or bridge mode (@4/8Ω). AURA Series are built with the highest robustness for long lasting performances with special power supply circuitry designed for optimized electrical consumption with fan cooling system. AURA Series also features the possibility of linking channels to the first input by selecting it on the rear panel, as well as auto stand-by, overload and thermal protection, PFC and anti-clipping system. The front panel volume knobs can be locked using rear panel switches for added security.

Channels

  • Number of output channels: 2
  • Output connection type: 2-pin Euroblock.  Pitch: 5,08mm
  • Output configuration: 2Ω, 4Ω, 8Ω, 100V, 70V and 4/8Ω in Bridge Mode
  • Number of input channels: 2
  • Input connection type: 3-pin Euroblock, balanced, pitch 3,5mm
  • Input configuration: Input link to CH1 selector per input

Output Power - All Channels Driven @1Khz @Cf9Db @ 1%Thd

  • Max output power @ 8Ω: 1000W
  • Max output power @ 4Ω: 1800W
  • Max output power @ 2Ω: 2400W
  • Max output power @ 4Ω bridge mode: 4600W
  • Max output power @ 8Ω bridge mode: 3400W
  • Max output power @ 100V: 1800W
  • Max output power @ 70V: 1800W

Output Power - Single Channel Driven @1Khz @Cf9Db @ 1%Thd

  • Max output power @ 8Ω: 1000W
  • Max output power @ 4Ω: 1800W
  • Max output power @ 2Ω: 2400W
  • Max output power @ 100V: 1800W
  • Max output power @ 70V: 1800W

Signal

  • Voltage gain: 36dB
  • Input sensitivity: 0 dBV 2,21 dBu 1 Vrms
  • Input impedance: 20kΩ balanced
  • Max input level: +20,4dBV 22,6 dBu

  • Frequency response: 15Hz - 30kHz (-3dB, 1W any load)
  • THD + Noise: <0,1% ( @1kHz, from 0,1W to Full Power)
  • SNR: 106 dBA
  • Crosstalk: >80dB (@1kHz)
  • CMRR: > 55 Typ (from 20Hz to 20kHz)

Electrical

  • Power supply: Universal, regulated SMPS with PFC
  • AC mains requirement: 100-240V @ 50-60Hz (±10%)
  • Power factor correction: > 0,95 (Output Power > 500W)
  • AC mains connector: IEC C14 inlet

Power & Heat @230Vac - 1/4 Power, @ 4Ω (All Channels Driven)

  • Power: 1086,5W 1134,0 VA
  • Current Draw: 5,16 Arms
  • Thermal Loss: 160,4 kcal/h 636,5 BTU/h

Power & Heat @230Vac - 1/8 Power, @ 4Ω (All Channels Driven)

  • Power: 603,3W 643 VA
  • Current Draw: 2,92 Arms
  • Thermal Loss: 131,8  kcal/h 523,2 BTU/h

Power & Heat @230Vac - Idle

  • Power: 65,4W 136 VA

  • Current Draw: 0,62 Arms
  • Thermal Loss: 56,2 kcal/h 223,2 BTU/h

Power & Heat @230Vac - Standby/Sleep Mode

  • Power: 2,8W 71,4 VA

  • Current Draw: 0,32 Arms
  • Thermal Loss: 2,4 kcal/h 9,6 BTU/h

Power & Heat @120Vac - 1/4 Power, @ 4Ω (All Channels Driven)

  • Power: 1123W 1139 VA
  • Current Draw: 9,74 Arms
  • Thermal Loss: 191,8 kcal/h 761,1 BTU/h

Power & Heat @120Vac - 1/8 Power, @ 4Ω (All Channels Driven)

  • Power: 613,5W 627 VA

  • Current Draw: 5,3 Arms
  • Thermal Loss: 140,6 kcal/h 558,0 BTU/h

Power & Heat @120Vac - Idle

  • Power: 63,5W 89 VA
  • Current Draw: 0,73 Arms
  • Thermal Loss: 54,6 kcal/h 216,7,6 BTU/h

Power & Heat @120Vac - Standby/Sleep Mode

  • Power: 1,3W 26 VA
  • Current Draw: 0,22 Arms
  • Thermal Loss: 1,1 kcal/h 4,4 BTU/h

Technologies

  • Amplification technology: Class D
  • Energy saving: Auto standby function selectable
  • Efficiency: 83% (1/4 POWER, @ 4Ω)
  • Cooling: 2 fans
  • Maximum fan noise: 57 dBA

Protections

  • AC protection: Yes
  • DC protection: Yes
  • HF protection: Yes
  • Short-circuit protection: Yes
  • Clip limiter: Yes
  • Thermal protection: Yes

Local Control

  • Attenuators: Front panel knobs per channel VOL (default)/BYPASS option
  • Output mode settings: Back panel Dipswitch by pairs of channels BRIDGE/2Ω/4Ω/8Ω/70V/100V
  • RUN/SLEEP mode: Auto standby function Front panel button
  • Power ON/OFF: Front panel switch

Settings

  • Attenuators: Front panel knobs per channel
  • Output settings: 2Ω/4Ω/8Ω/70V/100V/Bridge Mode output selection by pair of channels
  • Auto standby function: Front panel button
  • Auto standby threshold: -40dB
  • Auto standby time: 90 seconds
  • Power ON/OFF: Front panel switch

Monitoring

  • Signal Present: SIGNAL LED (Green) per channel
  • Cliping: CLIP LED (Red) per channel
  • Protect: TH/PROT LED (Red) per channel
  • Standby: AUTO STANDBY ON/OFF LED (Green) per unit
  • Standby / Mute: STANDBY (Orange) per channel
  • Limit: TH/PROT LED (Red)
  • Thermal: TH/PROT LED (Red) per channel
  • On: ON LED (Green) per unit
  • Link: LINK (White)

Physical

  • Operating temperature: -20⁰ to 40⁰ C -4⁰ to 104⁰ F
  • Operating humidity: 10-90% RH, non-condensing
  • Storage temperature: -40⁰ to 70⁰ C -40⁰ to 158⁰ F
  • Storage humidity: 10-95% RH, non-condensing
  • Installation options: Rack 19" installation & desktop
  • Included accessories: EU power cord, UK,US and CN power cord adapters, IEC Power Cord, x2 Euroblock 3-pin connectors (Inputs), x1 Euroblock 4-pin connectors (Outputs), Warranty Card, Rear Rack Kit, 3M rubber foot (4pcs)
  • Dimensions: 484 x 44 x 411.6mm / 19 x 1,73 x 16.20 in. in.
  • Weight: 7.55kg / 16.64 lb
  • Shipping dimensions: 590 x 80 x 590mm / 23.23 x 3.15 x 23.23 in.
  • Shipping weight: 10.65kg / 23.48 lb

Stock code ECL0116
Commodity Code 8518400090
Country Of Origin Spain
Order Code: ECL0116

AURA-2B1800 2x 1800W Low Impedance / 100V Installation Amplifier

Features

Read More

By clicking 'Ok', you agree to the storing of cookies on your device to enhance website functionality, analyse site usage, and assist in our marketing efforts.
For more information see our Privacy Policy.