CA120HZ is the high impedance version of the CA120, delivering 96W @ 70/100V line level, a technology which is especially suitable for long loudspeaker wire runs and/or an amount of loudspeaker units far beyond the 2 or 4 units typically connected to a low impedance amplifier. Under its tiny size, it features an amazing set of remote control features: serial RS-232 port, IR receiver and 0-10 VDC remote port. CA120HZ is an ideal solution in those audiovisual applications which require integration with external control devices: education classrooms, meeting rooms, multimedia presentations, retail shops, etc.

Channels

• Number of output channels: 1 + 1 AUX
• Output connection type: Euroblock
• Output configuration: 1 x 96W RMS @ 70/100V
• Number of input channels: 3
• Input connection type: MIC: balanced Euroblock or jack LINE: unbalanced minijack or double RCA
• Input configuration: 1 MIC/LINE input 2 LINE inputs

Output Power - All Channels Driven @ 1%Thd

• Max output power @ 100V: 96W @ 100Ω

Signal

• Input sensitivity: LINE: 0dBV (-6dBV internally selectable) MIC: -20 to -50dBV
• Input impedance: LINE: >8kΩ MIC: >1kΩ
• Frequency response: 50Hz - 30kHz (-3dB)
• THD + Noise: SPKR OUT: <0.09% AUX OUT: < 0.02%
• SNR: LINE: >70dB MIC (BAL): >50dB
• Crosstalk: >65dB @ 1kHz
• CMRR: MIC (BAL): >65dB @ 1kHz

Electrical

• Power supply: Universal
• AC mains requirement: 100-240V @ 50-60Hz + External PSU 24VDC (using Meanwell GS60A24-P1J)
• AC mains connector: DC24V power connector

Power Consumption

• Power Consumption (1/3 POWER, @ 4Ω all channels driven): pink noise, 58VA / 52W
• Power Consumption (1/8 POWER, @ 4Ω all channels driven): pink noise, 33VA / 24W
• Power Consumption (STBY/SLEEP): <2.5W

Technologies

• Energy saving: Auto standby function
• Efficiency: TBC
• Cooling: Convection (fanless)

Protections

• AC protection: No
• DC protection: No
• VHF protection: No
• Short-circuit protection: No
• Clip limiter: No
• Long term limiter: No
• Thermal protection: No

Remote Control Connections

• GPIs: Volume & Input/preset selection (0-10V. based)
• External MUTE: Power free contact (infrared remote)

Settings

• Attenuators: Front panel knob
• Tone control: 2-band independent tone control (Bass, Treble) for the microphone / line 3 and line 1&2 input connection.
• Filters: 50Hz - 70Hz High Pass Filter
• Output settings: Mono only outputs (L+R summed in case of active stereo input)
• Auto standby function: Rear panel micro switch
• Auto standby time: 120 seconds

Connectivity

• Serial port: RS-232
• Programing and control: EclerCOMM software or CA-NET protocol

Monitoring

• Signal Present: SP LED (Green)
• Cliping: CLIP LED (Red)
• Standby: STBY LED (Orange)

Physical

• Operating temperature: Min: -10°C ; 14°F Max: 40°C ; 104°F
• Operating humidity: <85% HR
• Storage temperature: Min: -10°C ; 14°F Max: 40°C ; 104°F
• Storage humidity: <90% HR
• Installation options: Wall or under a surface (table, shelf, cupboard, etc.)
• Included accessories: REVO-IR remote control
• Optional accessories: WPaVOL or WPaVOL-SR for remote control
• Dimensions: 160 x 48 x 325mm / 6.3 x 1.89 x 12.8 in. (WxHxD)
• Weight: 2.92kg / 6.44 lb
• Shipping dimensions: 450 x 60 x 220mm / 17.72 x 2.36 x 8.66 in. (WxHxD)
• Shipping weight: 3.8kg / 8.38 lb