VIDA-24Q is a 2400W digital amplifier, with 4 amplified outputs that can be independently configured in high (100/70V) or low (8/4/2ohm) impedance. The VersaPower technology, developed by Ecler, allows an asymmetrical power distribution, and thanks to the Smart VersaPower tool it helps installers by facilitating a smart and fast configuration. In addition, the Class D amplification technology as well as the configurable 4-outputs auto standby and sleep mode functions, both configurable, further improve energy efficiency.

This device offers a wide range of possibilities thanks to its 4 analogue and 4 Dante/AES67 digital inputs, audio player - with microSD slot for local audio files – as well as signal generator, plus 2 auxiliary line outputs and Dante/AES67 digital outputs.

All these features are managed from its intuitive web application which, among other functionalities, allows signal routing - matrix -, audio signal processing - such as equalisation or limiters -, priority management, GPIO configuration through events, as well as calendar events, playlist management and SD card content, thus facilitating the start-up of the audio-visual installation, its maintenance and customisation.

Thanks to the Android/iOS/Web application available to the end user, the audio installation can be managed by them in an easy, intuitive, and customised way.

Channels

• Number of output channels: 4
• Output connection type: 2-pin Euroblock. Pitch: 7,62mm Ref: DEGSON 5EDGRC-7.62
• Output configuration: Lo-Z/Hi-Z, 70V/100V, 4Ω/8Ω/2Ω. Output mode selection per channel. Rear panel DIP SWITCH selectors
• Number of input channels: 4 analogue input channels. 4 DANTE/AES67 Network Rx channels. 1 embedded player, 1 embedded signal generator
• Input connection type: Digital: Ethernet, managed via Dante/AES67 Controller Analogue: IN1-4: 3-pin Euroblock, balanced, pitch 3,5mm
• Input configuration: Digital matrix 4 in x 6 out

Auxiliar Outputs

• Number of auxiliar outputs: 2
• Auxiliar output connection type: AUX1-2: 3-pin Euroblock, balanced

Digital Outputs

• Number of digital outputs: 4
• Digital output connection type: Ethernet, managed via Dante/AES67 Controller

Versapower - Symmetrical All Channels Driven @1Khz @Cf9Db @ 1%Thd

• Max output power @ 8Ω: 600W
• Max output power @ 4Ω: 600W
• Max output power @ 2Ω: 600W
• Max output power @ 100V: 600W
• Max output power @ 70V: 600W

Versapower - Asymmetrical Single Channel Driven @1Khz @Cf9Db @ 1%Thd

• Max output power @ 8Ω: 1400W
• Max output power @ 4Ω: 2400W
• Max output power @ 2Ω: 1600W
• Max output power @ 100V: 2400W
• Max output power @ 70V: 2000W

Signal

• Voltage gain: 28 to 40 dBV 30,2 to 42,2 dBu
• Input sensitivity: -6 to +6 dBV -3,78 to 8,2 dBu 0,5 to 2 Vrms
• Input impedance: >24kΩ
• Max input level: +18 dBV +20,2 dBu
• Frequency response: 15Hz-25kHz
• THD + Noise: < 0,1% 0,015 Typ
• SNR: 95 dBA
• Crosstalk: >80dB
• CMRR: >65 Typ
• Damping factor: >500

Electrical

• Power supply: Universal, regulated SMPS with PFC
• AC mains requirement: 100-240V @ 50-60Hz (±10%)
• Power factor correction: > 0,96
• AC mains connector: IEC C14 inlet

Power & Heat @230Vac - 1/4 Power, @ 4Ω (All Channels Driven)

• Power: 848W 888 VA
• Current Draw: 3,88 Arms
• Thermal Loss: 214,1 kcal/h 849,8 BTU/h

Power & Heat @230Vac - 1/8 Power, @ 4Ω (All Channels Driven)

• Power: 498W 536 VA
• Current Draw: 2,33 Arms
• Thermal Loss: 170,3 kcal/h 675,8 BTU/h

Power & Heat @230Vac - Idle

• Power: 72W 122 VA
• Current Draw: 0,52 Arms
• Thermal Loss: 61,9 kcal/h 245,7 BTU/h

Power & Heat @230Vac - Standby/Sleep Mode

• Power: 4,1W 23,8 VA
• Current Draw: 0,1 Arms
• Thermal Loss: 3,5 kcal/h 14 BTU/h

Power & Heat @120Vac - 1/4 Power, @ 4Ω (All Channels Driven)

• Power: 855W 865 VA
• Current Draw: 7,37 Arms
• Thermal Loss: 219,3 kcal/h 870,3 BTU/h

Power & Heat @120Vac - 1/8 Power, @ 4Ω (All Channels Driven)

• Power: 483W 493 VA
• Current Draw: 4,16 Arms
• Thermal Loss: 157,4 kcal/h 624,6 BTU/h

Power & Heat @120Vac - Idle

• Power: 68W 89 VA
• Current Draw: 0,75 Arms
• Thermal Loss: 58,5 kcal/h 232,1 BTU/h

Power & Heat @120Vac - Standby/Sleep Mode

• Power: 3,6W 10,2 VA
• Current Draw: 0,09 Arms
• Thermal Loss: 3,1 kcal/h 12,3 BTU/h

Technologies

• Amplification technology: Class D
• Energy saving: Auto standby function programmable per channel Sleep Mode function selectable
• Efficiency: 72%
• Cooling: Fan
• Maximum fan noise: 53dB

Dsp

• Latency: 2,8 ms
• Digital processing: 32/64 bit
• Inputs processing: Noise gate, HPF, Freq. Shifter, compressor/limiter
• Outputs processing: Delay, Parametric EQ, Graphic EQ independent for every amp out and aux out Limiters independent for every amp out Smart VersaPower management
• Others: Preset management, Internal matrix, priority & backup signals managemnet, local & network groups, events management incl. calendar

Protections

• AC protection: N/A
• DC protection: Yes
• HF protection: Yes
• Short-circuit protection: Yes
• Clip limiter: Yes
• Long term limiter: Yes
• Thermal protection: Yes

Remote Control Connections

• ON / OFF: No
• GPIs: x4 GPIs (0-10V)
• GPOs: x4 NC / NO contacts
• External MUTE: Yes, contact

Local Control

• Attenuators: Programmable Front panel knobs
• Output mode settings: Lo-Z/Hi-Z, 70V/100V, 4Ω/8Ω/2Ω Output mode selection per channel
• RUN/SLEEP mode: Yes, front panel push-button
• Power ON/OFF: Yes, back panel switch

Connectivity

• Ethernet: Ethernet Base-Tx 10/100/1000Mb Auto X-Over
• DANTE Protocol: Dante/AES67 4x Tx / 4x Rx channels (2/2 flows) Primary and secondary capability. RJ-45 ports (Settings by embedded web application)
• Programing and control: Embedded web application

Monitoring

• Signal Present: SP LED (White) per channel
• Cliping: CLIP LED (Red) per channel
• Protect: PROT LED (Red) per channel
• Standby: N/A
• Standby / Mute: STBY/MUTE LED (White) per channel
• Limit: LIMIT LED (Red) per unit
• Thermal: THERMAL LED (Red) per unit
• Dante: DANTE/AES67 LED (White) per unit
• Data: DATA LED (White) per unit
• On: ON LED (White) per unit

Digital Engine

• Processor: Quad core 64bits 1,5GHz

Audio Converters

• Sampling rate: 48kHz
• Resolution: 24 bit
• Dynamic range: 114dB

Real-Time Clock

• Retention time: > 5 years
• Accuracy: ±1 minute / month
• Battery: VARTA CR2032 3V, 230mAh

Local Storage

• Micro SD: SDXC
• Capacity: Up to 2TB
• File system: FAT16, FAT 32, VFAT (read/wirte) NTFS (read) Multi-partition up to 1
• Playable audio files: mp3, ogg, WAV, FLAC, AIFF
• Files analysis: 65354 playable folders 65354 playable folders within each folder 65354 playable files within each folder
• Folder hierarchy: Up to 8 containing the root directory
• Sorting: UNICODE, in alphabetical order Up to 100 folders / files by folder Folders/files over 100 sorted in the FAT order

Physical

• Operating temperature: Min: -10⁰C ; 14⁰F Max: 50⁰C ; 122⁰F
• Operating humidity: 5 - 85% RH, non-condensing
• Storage temperature: Min: -10⁰C ; 14⁰F Max: 50⁰C ; 122⁰F
• Storage humidity: 5 - 85% RH, non-condensing
• Installation options: Rack 19" installation & desktop
• Included accessories: Mains cords, Euroblock Connectors (inputs /outputs), Desktop feet, rack 19" installation hardware
• Dimensions: 482.6 x 88 x 410mm / 19 x 3.46 x 16.14 in. (WxHxD)
• Weight: 9.3kg / 20.5 lb
• Shipping dimensions: 650 x 125 x 600mm / 25.59 x 4.92 x 23.62 in. (WxHxD)
• Shipping weight: 12.3kg / 27.1 lb