The AU-DTI4-TX – Dante Transmitter is a 4-channel analogue audio to Dante output transmitter. Thanks to the integrated support for Dante technology, which extends and routes audio across standard Ethernet networks, this unit forms an important part of an easier and more flexible system for managing large audio systems than traditional point-to-point physical wiring.
Dante does away with the bundles of heavy, expensive, multi-core analogue audio cables and replaces it with low cost, and easy to manage, Cat.5e or Cat.6 cables while maintaining the high quality expected from uncompressed digital audio.
Due to the nature of packet-based Ethernet data transmission, there is no need to worry about the traditional enemies of long distance audio extension, such as analogue signal interference, crosstalk, or signal attenuation. All of this is provided with the absolute minimum of latency (typically around 1ms).
AU-DTI4-TX – Dante Transmitter has four analogue mono audio inputs and one Dante output port which transmits up to 4 digital audio channels and is compatible with any standard Dante audio receivers. Each audio input can optionally supply phantom power (5v or 48v) if needed by a connected audio source, such as a microphone, as well as a Pre-Gain level adjustment.
Powered by PoE (Power over Ethernet) for flexibility in installation location. Basic device configuration is provided by serial over USB while routing and network configuration management is provided via 3rd party control software.