The CR-CS2 IP Controller is a simple Control System for a wide variety of connected devices. It stores 16 user-defined macro events that users can activate through the Web GUI or Telnet. External trigger connections can also activate eight of these macros.. User defined macros can send commands to remote devices via Ethernet, IR (x4), relay trigger (x4), or RS-232/422/485 (x1) allowing for the control of a wide array of devices at the push of a button.

An integrated IR code learning function is also available, allowing the user to store and re-transmit the IR codes sent by nearly any standard IR remote. Comprehensive user control interfaces are available including Web GUI, telnet and console (RS-232 in). The CR-CS2 IP Controller supports Power over Ethernet (PoE), allowing you to power it directly from a standard PoE network switch without an external power adapter for simple installation..

• Inputs: 1 x RJ45 [1 x (PoE) IP Control], 1 x USB Type A [1 x Service Port Propriety Data], 1 x Phoenix (5-pin) [1 x RS-232/422/485 Com Port], 1 x Phoenix (10-pin) [1 x Trigger In (8)], 1 x 3.5mm Stereo mini-jack [1 x IR capture - Infra Red Receiver]
• Outputs: 4 x Phoenix (2-pin) [4 x Contact Closure Relay Outputs], 4 x 3.5mm Stereo mini-jack [4 x Infra Red Emitter]
• POE PSU: PoE
• PSU: 5V/2.6A
• Dimensions (H x W x D): 25 x 128 x 108mm
• Net Weight: 400g
• Gross Weight: 940g